STRATOMASTER MGL Avionics, Instruments & EFIS

Guest  
Accueil/Home
Français
English
Deutsch
RDAC (Engine Acquisition)
 
General

Stratomaster MGL Velocity Singles

Click for a slower animation Velocity Single

  • This range is obsolete and replaced by the "BLAZE" color range.
  • Using a custom made, high resolution graphics display, these instruments provide excellent daylight readability, even in direct sunlight. In addition they all have built in backlighting making them easy to read at night time.
    They include a rotary control plus two independent keys for easy menu navigation and to access specific instrument features.
    The Velocity range also has a switch mode power supply allowing the instrument to be used in both 12V and 24V aircraft as well as for reduced power consumption. It also features built in reverse and over voltage protection.

  • The Stratomaster Velocity range consists of sixteen 3"1/4 (80mm) microprocessor based instruments
  • ALT-3Encoding Altimeter, Variometer, OAT
    ALT-4Precision encoding altimeter and VSI indicator with a serial RS232 transponder output
    ASI-3Airspeed Indicator (ASI) with automatic flight log
    ASX-2Encoding aviation altimeter and Airspeed Indicator (ASI) with automatic flight log
    AV-2Artificial horizon and magnetic compass indicator
    E-1Universal Engine monitor
    FF-3Fuel Computer for Single or dual fuel tanks
    FLIGHT-2Primary Flight Instrument
    GF-2+/-10G Tilt compensated dual range G-force meter, with memories
    MAP-2Universal pressure and RPM indicator (and optional Temperature measurement with MAP-2T)
    ROTOR-1Dual Rotor / Engine Tachometer
    RTC-1Aviation Real Time Clock (RTC) & Outside Air Temperature (OAT) display
    RV-3Universal engine RPM and rotor RPM Indicator
    TC-21 to 4 Channel thermocouple temperature display
    TC-31 to 12 Channel thermocouple temperature display
    TP-2Universal Temperature/pressure gauge
  • Combine AV-1 modules with SP-x module to build
      6HRS0103.125" (80mm) Magnetic Compass
      7ARS0103.125" (80mm) Horizon
      76AHRS0103.125" (80mm) Horizon & Magnetic Compass

  • Standard 3"1/4 aircraft enclosure (Can be front or rear mounted)
  • Rotary control plus 2 independent buttons for easy menu navigation and user input
  • Instruments format details and template in "Velocity_DIM.pdf"
  • Alarm output as well as a red LED illuminates for alarm notification
  • Large 57x30mm backlit graphic LCD 128x64 pixels with adjustable contrast
  • Multiple display screens (model dependent)
  • On board voltage reversal and over voltage protection for harsh electrical environments
  • SMPS (Switch mode power supply) for use in both 12V and 24V systems as well as for reduced power consumption
  • Light weight design, 150g approximatly
  • Field upgradeable firmware
  • Operating Temperature -10ºC to 50ºC (14ºF to 122ºF)
  • Storage Temperature -20ºC to 80ºC (-4ºF to 176ºF)
  • Humidity <85% non-condensing
  • For smaller instruments, see the 57mm "Infinity" range
  • The cutout drawing in .DXF format is available there "mgl_velocity.dxf"
  • Probes and senders
  • Attitude & Compass
  • Subscribe to our MGL newsletter
  • Ask for a Catalog/Price list

  • ALT-3 Encoding Altimeter, Variometer, OAT

    Velocity MaxiSingles ALT-3

    Cliquer pour voir une animation

    • This product is obsolete and replaced by the BLAZE ALT-6.
      The ALT-3 is a 3 1/8” instrument that contains a precision altimeter and a wide range vertical speed indicator.
      The altimeter conforms to ANSI standard atmosphere rules from –700 ft up to a maximum of 30 000 ft.
      The altimeter can display altitude in feet or meters, local pressure can be set in millibars or inches of mercury
      The onboard VSI indicator is altitude compensated and can be displayed in either feet/minute (ft/min) or meters/second (m/s). It also offers a digital readout with a wide range from +/-20 ft/min to as high as +/-10 000 ft/min, it also offers a logarithmic analog display with a +/-2000 ft range. The VSI can be calibrated by the user once the instrument has been installed in the aircraft.
      In addition the ALT-3 provides an OAT sender which is used in determining the density altitude of the aircraft. The ALT-3 can also be used to measure relative altitude and it has a facility for the pilot to enter a reference altitude and deviation band that has to be kept.
    • Precision altimeter from –700 ft up to a maximum of 30 000 ft (-213m to 9144m)
    • The altimeter can display altitude in feet or meters
    • Local pressure can be set in millibars or inches of mercury
    • Altimeter resolution 3m (10ft) at sea level
    • Altitude accuracy +/- 1mB, +/- 30ft at sea mevel
    • Wide range VSI indicator from +/-20 ft/min to as high as +/-10 000 ft/min
    • VSI units can be in feet/minute (ft/min) or in meters/second (m/s)
    • Outside Air Temperrature is used to calculate Density Altitude
    • Reference altitude and deviation band with alarm
    • Alarm LED and alarm output for external alarm
    • Records the maximum and minimum OAT (outside air temperature) and maximum altitude reached in permanent memory
    • Records maximum and minimum OAT in temporary memory since instrument power up
    • Power: about 43mA @ 13.8V (with backlight) and 16mA @ 13.8V (without backlight)
    • Weight: about 180g
    • Download the manual (French): Vel_alt-3.pdf
    • Download the manual (English): Vel_EN_alt-3.pdf
    • Ref : MG_Vel_ALT3
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity ALT-3? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Velocity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "ALT-3 Simulator" : Download installation program ALT3_Simulator.exe Updated 11 july 12

    Return to general description

  • ALT-4 Encoding altimeter and VSI indicator with serial RS232 transponder output

    Velocity MaxiSingles ALT-4

    Cliquer pour voir une animation

    • This product is obsolete and replaced by the BLAZE ALT-7.
      The ALT-4 is a 3 1/8” instrument that contains a precision altimeter and a wide range vertical speed indicator.
      The altimeter conforms to ANSI standard atmosphere rules from –700 ft up to a maximum of 30 000 ft.
      The altimeter can display altitude in feet or meters, local pressure can be set in millibars or inches of mercury
      The ALT-4 also provides a transponder compatible Serial RS232 and parallel gillham code output.
      The onboard VSI indicator is altitude compensated and can be displayed in either feet/minute (ft/min) or meters/second (m/s). It also offers a digital readout with a wide range from +/-20 ft/min to as high as +/-10 000 ft/min, it also offers a logarithmic analog display with a +/-2000 ft range. The VSI can be calibrated by the user once the instrument has been installed in the aircraft.
      In addition the ALT-4 provides an OAT sender which is used in determining the density altitude of the aircraft. The ALT-4 can also be used to measure relative altitude and it has a facility for the pilot to enter a reference altitude and deviation band that has to be kept.
    • Precision altimeter from –700 ft up to a maximum of 30 000 ft (-213m to 9144m)
    • Provides a transponder compatible Serial RS232 and parallel gillham code output. Built in encoder test functions
    • The altimeter can display altitude in feet or meters
    • Local pressure can be set in millibars or inches of mercury
    • Altimeter resolution 3m (10ft) at sea level
    • Altitude accuracy +/- 1mB, +/- 30ft at sea mevel
    • Wide range VSI indicator from +/-20 ft/min to as high as +/-10 000 ft/min
    • VSI units can be in feet/minute (ft/min) or in meters/second (m/s)
    • Outside Air Temperrature is used to calculate Density Altitude
    • Reference altitude and deviation band with alarm
    • Alarm LED and alarm output for external alarm
    • Records the maximum and minimum OAT (outside air temperature) and maximum altitude reached in permanent memory
    • Records maximum and minimum OAT in temporary memory since instrument power up
    • Power: about 43mA @ 13.8V (with backlight) and 16mA @ 13.8V (without backlight)
    • Weight: about 180g
    • Download the manual (French): Vel_ALT-4.pdf
    • Download the manual (English): Vel_EN_ALT-4.pdf
    • Ref : MG_Vel_ALT4
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity ALT-4? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Velocity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "ALT-4 Simulator" : Download installation program ALT4_Simulator.exe Updated 11 july 12

    Return to general description

  • ASI-3 Airspeed indicator (ASI) with automatic flight log

    Velocity ASI-1

    Velocity ASI-3

    • This product is obsolete and replaced by the BLAZE ASI-5.
      The ASI-3 airspeed indicator is a 3 1/8” instrument that provides a wide range airspeed indication in both digital and analog formats. Airspeed is based on the pressure generated by a pitot tube system and a static port is provided as well for use by high speed aircraft. In addition, the ASI-3 provides a 24 entry automatic flight log that stores the duration of each of the last 24 flights, an air-distance trip counter and a current flight timer.
      Airspeed can be indicated in statute miles per hour (mph), kilometers per hour (km/h) or nautical miles per hour (knots) with the air-distance being displayed in corresponding units. The analog airspeed display can be scaled according to the aircrafts flying speed range and markers for Vs, Vf, Vno and Vne can be set. ASI sensitivity can be calibrated by the user to cater for errors caused by pitot tube placement.
      The ASI-3 instrument measures airspeed from 16mph to 250mph and is well suited to slower aircraft due to very good sensitivity and linearity at low air speeds.
    • Measure airspeed from 16mph to 250mph and is well suited to slow aircraft due to very good sensitivity and linearity at low air speeds.
    • Includes a 24 entry automatic flight log
    • Includes an air-distance trip counter and a flight timer
    • Airspeed units can be set to miles per hour (mph), kilometer per hour (km/h) or nautical miles per hour (knots)
    • Contains a programmable low/high airspeed alarm
    • Records maximum airspeed reached in permanent memory
    • Analog bar graph indicating airspeed with markers for Vs, Vf, Vno and Vne
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 176g approx.
    • Download the manual (French): Vel_asi3.pdf
    • Download the manual (English): Vel_asi3_EN.pdf
    • Ref : MG_Vel_ASI3
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity ASI-3? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Velocity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "ASI-3 Simulator" : Download installation program ASI3_Simulator.exe Updated 11 july 12

    Return to general description

  • ASX-2 Encoding altimeter and airspeed Indicator (ASI)

    Infinity SmartSingles ASX-2

    Velocity ASX-2

    • This product is obsolete and replaced by the BLAZE ASV-2.
      The ASX-2 altimeter/airspeed combo is a 3 1/8" instrument based on a precision altimeter and a wide range, sensitive airspeed indicator. The altimeter conforms to ANSI standard atmosphere rules from –700 ft up to a maximum of 30 000 ft.
      The altimeter includes an encoding serial output that, when used in combination with MGL Avionics CNV-AT, provides a parallel Gillman code interface for transponders. The altimeter can display altitude in feet or meters. Local pressure can be set in millibars or inches or mercury.
      The airspeed indicator can show air speeds from 16 to 250 mph and is well suited for use in slow aircraft due to very good sensitivity and linearity at low air speeds. The airspeed indicator as well as altimeter can interface to a static port and the airspeed indicator is based on a standard aviation pitot tube. The airspeed indicator can be set to indicate speeds in statute miles per hour (mph), kilometers per hour (km/h) or nautical miles per hour (knots) with the air-distance being displayed in corresponding units. The airspeed sensitivity can be calibrated by the user to cater for errors caused by pitot tube placement. The ASX-2 also outputs airspeed information via the airtalk protocol for interfacing to the Infinity FF-1 (fuel flow computer for single or dual fuel tanks) and the SP-X (AHRS) instruments.
      In addition the ASX-2 provides a 24 entry automatic flight log that stores the duration of each of the last 24 flights, an air-distance trip counter and a current flight timer. The ASX-2 is the ideal instrument for installations were panel space is at a premium.

    • Precision altimeter for –700 ft up to a maximum of 30 000 ft
    • Provides a parallel Gillman code interface for transponders when used in combination with the MGL Avionics CNV-AT.
    • The altimeter can display altitude in feet or meters. Local pressure can be set in millibars or inches or mercury.
    • Airspeed ranges from 16 to 250mph and is well suited to slow aircraft due to very good sensitivity and linearity at low air speeds. Airspeed can be displayed as IAS or a calculation based TAS.
    • Includes a 24 entry automatic flight log
    • Includes an air-distance trip counter and a flight timer
    • Airspeed units can be in miles per hour (mph), kilometer per hour (kph) or nautical miles per hour (knots)
    • Contains a programmable low/high airspeed alarm
    • Records maximum airspeed and altitude reached in permanent memory
    • Serial AIRTALK output for SP4, FF-1 or CNV-AT converter for transponder.
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 176g approx.
    • Download the manual (French): Inf_ASX-2.pdf
    • Download the manual (English): Inf_EN_ASX-2.pdf
    • Ref : MG_Inf_ASX2
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity ASX-2? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Velocity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "ASX-2 Simulator" : Download installation program ASX2_Simulator.exeUpdated 11 july 12

    Return to general description

  • AV-2 Artificial horizon and advanced magnetic compass indicator

    Velocity AV-2

    Velocity AV-2 Velocity AV-2

    • This product is obsolete and replaced by the BLAZE AHRS-2.
      The AV-2 is a 3 1/8” instrument that can be used as a display interface for an artificial horizon reference system (AHRS) or as an advanced digital compass, or both depending on which MGL Avionics sensor packages is connected to the AV-2.
      The AV-2 can be setup to display the following:
      You can also share sensor packages between various different size instruments eg. AV-1 units (these have a 2.25” display). For example you may want a 3.5” horizon display but a 2.25” compass/turn and bank indicator.

    • Artificial horizon reference system (AHRS) display unit with slip indication as well as turn and bank indication.
    • Advanced magnetic compass with course steering feature.
    • Can be setup as an individual compass display, artificial horizon or both.
    • The AV-2 is connected to the sensor packages by a simple 2 wire communication link. This allows for the optimum placement of the sensor packages in the aircraft.
    • More then one AV-2 can be connected onto a airtalk link. This allows for displaying the compass, artificial horizon and the turn and bank indicator on different AV-1 and/or AV-2 units.
    • G-Force indicator (SP4/5/7 required)
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 90g approx.
    • Download the manual (Français): Inf_AV-2.pdf
    • Download the manual (English): Inf_EN_AV-2.pdf
    • Ref : MG_Vel_AV2
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity AV-2? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Velocity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "AV-2 Simulator" : Download installation program AV2_Simulator.exe Updated 11 july 12

    Return to general description

  • E-1 Universal engine monitor

    Velocity E-1 Universal Engine Monitor

    Velocity E-1

    • This product is obsolete and replaced by the BLAZE EMS-2.
    • The E-1 universal engine monitor combines in one compact 3.125” format instrument all that is needed to monitor the majority of smaller aircraft engines from two-stroke ultra-light engines to medium sized four strokes such as those from Rotax, Continental and Lycoming. Most automotive engine conversions can also benefit from the use of the E-1 engine monitor.
      The E-1 can measure up to 4 EGT/CHT channels, a RPM input, a universal temperature sender input, a universal pressure sender input and also the supply voltage.
    • 66 different engine setup configurations possible
    • Universal, programmable rev counter (engine RPM) with digital and analog readout, with a programmable high alarm limit
    • Programmable engine Hobbs meter (password protected) and running timer (flight timer) with automatic flight log
    • Can monitor up to four programmable thermocouple channels for EGT and CHT probes with a user programmable high alarm limit
    • A universal temperature sender input with a user programmable low and high alarm limits
    • A universal pressure sender input with a user programmable low and high alarm limits
    • Supply voltage display and monitoring with low and high programmable alarms.
    • Maximum recorded values for all measured values are stored in non-volatile memory
    • High accuracy: Built in thermocouple linearization curves and cold junction compensation
    • Thermocouple temperature probes can be common K or J or E type thermocouple probes
    • Uses standard automotive temperature and pressure senders
    • Special Rotax 912/914 engine monitor mode utilizing the standard built-in Rotax NTC CHT probes. Warning: This mode will use the two resistance/voltage inputs, thus preventing to use them for Oil Temperature and Pressure.
    • If the resistive/voltage inputs are used for Oil Pressure and Temperature probes, they cannot be used for Rotax resistive NTC probes, et reciprocally.
    • When using the two resistance/voltage inputs for Oil Temperature, CHT temperature cannot be measured with the standard built-in Rotax NTC CHT probes. You can in that case measure CHT on thermocouple channels with
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 242g approx.
    • Download the manual (French): Vel_E1.pdf
    • Download the manual (English): Vel_EN_E1.pdf
    • Ref : MG_Vel_E1
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity E1? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Velocity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "E1 Simulator" : Download installation program E1_Simulator.exeUpdated 11 july 12

    Return to general description

  • FF-3 Fuel Management System

    Velocity FF-3 Fuel Computer

    Velocity FF-3

    • This product is obsolete and replaced by the BLAZE FF-5.
    • The FF-3 fuel management computer is a 3 1/8” instrument intended for efficient monitoring of fuel related information for single or dual fuel tanks onboard small aircraft and related applications.
      The FF-3 unit can connect to one or two fuel flow senders, one or two fuel level senders or both. Full functionality is available with both senders or only with a fuel flow sender using calculated fuel levels based on fuel usage. Differential or Additional fuel flow calculations are also supported for fuel return systems. Fuel injector systems are also supported.
      Standard automotive fuel level senders can be used, even with odd shaped tanks due to a comprehensive, multi-point calibration system. Most fuel flow senders can be used and the K-factor of the sender can be entered into the system for simple calibration. MGL Avionics supplies a lightweight dual range fuel flow sender that is ideally suited for the FF-3.
      In addition, the FF-3 can be connected via the airtalk communication link to the Stratomaster Velocity ASX-1 for automatic range calculation which is based on current fuel usage, fuel remaining and current airspeed. It can also use Ground Speed if connected to a GPS providing the "GPVTG" message.

    • Advanced fuel computer with 17 different modes of operation
    • Supports single or dual fuel tanks
    • The FF-3 can connect to one or two fuel flow senders, fuel level senders or fuel injectors. See Probes & Senders
    • Differential or Additional fuel flow calculations are also supported for fuel return systems
    • Fuel flow by the means of measuring the fuel injectors on time is also supported
    • Range calculations are based upon :
      • Airspeed if connected to a Stratomaster Velocity ASI-1 or ASX-1 via the airtalk link
      • Ground speed if connected to a GPS
      • a manually entered cruising speed if an ASX-1 instrument or a GPS are not available
    • Standard automotive fuel level senders can be used, even with odd shaped tanks due to a comprehensive, multi-point calibration system
    • Bilingual support (English and French)
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 182g approx.
    • Download the manual (French): Vel_FF3.pdf
    • Download the manual (English): Vel_EN_FF3.pdf
    • Ref : MG_Vel_FF3
    • Ask for a Catalog/Price list
    Do you want to try an MGL Infinity FF-1? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Infinity" instrument. The simulator allows you to almost fully operate a virtual "Infinity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "FF-1 Simulator": Download installation program FF1_Simulator.exe Updated 11 july 12

    Return to general description

  • Flight-2 Primary Flight Instrument

    Stratomaster Velocity FLIGHT-2

    velocity FLIGHT-2

    • This product is obsolete and replaced by the BLAZE FLIGHT-3.
    • The Flight-2 is a compact, multifunction complete primary flight system intended as a main flight instrument on smaller aircraft or as a backup / secondary flight instrument in larger aircraft. This 3 1/8” instrument provides many functions from an altimeter, airspeed indicator, fuel level and flow, engine RPM and many secondary functions, including an automatic flight log.
    • The Flight-2's light weight, small size and high level of functionality makes it an excellent choice for many applications.
    • The Flight-2 makes an ideal companion to the Velocity E-1 universal engine monitor for a compact, low cost yet highly functional and complete cockpit solution.
    • The Flight 2 is available in a special OEM version providing a serial data output of all primary flight data
    • Altimeter (–700ft (-213m) to 30 000ft (9144m)). Altitude can be displayed in feet or meters. Local pressure can be set in mbar or in “Hg.
    • Airspeed indicator (16mph to 250mph)
    • Altitude compensated digital VSI indicator (+/-20 ft/min to +/-10 000 ft/min) and a logarithmic analog VSI indicator (+-2000 ft/min range). VSI can be displayed in ft/min or m/s.
    • Vario logarithmique analogique (+-2000 ft/min). Affichage en ft/min ou m/s.
    • Automatic flight duration timer
    • Fuel flow (optional fuel flow sender). Fuel flow can be displayed in liters or Gallons.
    • Fuel level calculated from fuel flow or from a fuel level sender
    • Multi point fuel level sender calibration to compensate for odd shaped tanks and nonlinear fuel level senders
    • Current range estimate (range at current speed and fuel burn). Can be displayed in statute/nautical mile or in kilometers
    • Fuel bingo estimate (time until tank empty)
    • Universal RPM counter (0 to 20000RPM)
    • Real Time Clock (RTC) for local time and flight log use
    • Settable Hobbs meter (password protected)
    • Programmable Maintenance timer for scheduled routine engine maintenance
    • OAT (Outside air temperature) display using an external sensor
    • Supply Voltage display
    • Density altimeter
    • Barometer (actual local pressure)
    • True airspeed (TAS display)
    • Fuel range based on TAS, IAS or GPS-NMEA input
    • Fuel endurance based on TAS, IAS or GPS-NMEA input
    • Stopwatch
    • Glide and climb ratio indicator
    • Alarm on low/high RPM, low/high airspeed, low/high supply voltage and low fuel level
    • Records maximum values reached in permanent memory
    • Includes a 24 entry automatic flight log
    • "Airtalk" connection for flight log download (with optional cable or download key)
    • Download the manual (French): Vel_Flight2_FR.pdf
    • Download the manual (English): Vel_EN_Flight2.pdf
    • Probes & Senders
    • Ref : MG_Vel_Flight2
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity Flight-2? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Velocity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "FLIGHT-2 Simulator": Download installation program Flight2_Simulator.exe Updated 11 july 12

    Return to general description

  • GF-2 G-force meter

    Velocity SmartSingles GF-2

    Velocity GF-2

    • This product is obsolete and replaced by the BLAZE INFO-2.
    • The GF-2 is a 3 1/8” g-force meter capable of measuring G-forces exerted in an aircraft up to +-10G. The forces acting on the aircraft is easily seen on a large backlit graphics display both numerically and graphically. The GF-2 also has the facility to record maximum G-forces obtained in permanent memory as well as it has a temporary memory to record G-forces reached from the time of power up. It also features 2 independent cycle counters to capture the amount of times a preset force has been exceeded. The GF-2 is able to measure G-forces even if the instrument is not mounted exactly in the vertical axis of the aircraft.

    • Typical, accurate range up to 20G (From -10Gto +10G)
    • Records maximum measured forces in permanent memory (Both positive and
    • Negative G-forces), with password protected reset facility
    • Two independent cycle counters record the number of times a preset force has been exceeded.
    • Temporary memory for maximum positive and negative G-forces encountered (typically during a flight)
    • Clear large readable G-force numerical value (10G positive and negative)
    • Scalable graphic analog display of force acting on the aircraft
    • 2 axis design of the instrument allows mounting in sloped panels (i.e. panel not exactly vertical)
    • Quick calibration function for operation at temperature extremes using Earth gravity.
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 90g approx.
    • Download the manual (French): Inf_GF2.pdf
    • Download the manual (English): Inf_EN_GF2.pdf
    • Ask for a Catalog/Price list
    • Ref : MG_Vel_GF2
    Do you want to try an MGL Infinity GF-1? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Infinity" instrument. The simulator allows you to almost fully operate a virtual "Infinity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "GF-1 Simulator": Download installation program GF2_Simulator.exe Updated 11 july 12

    Return to general description

  • MAP-2 Universal Pressure and RPM indicator

    Velocity SmartSingles MAP-2

    Velocity MAP-2

    • This product is obsolete and replaced by the BLAZE MAP-4.
    • The MAP-2 is a 3 1/8” instrument which can measure pressures in the range from 0.25 bars (3.6 PSI) to 2.5 bars (36.2 PSI) as well as simultaneously display RPM from a universal RPM input.
      Pressure can be displayed in millibar, bar, PSI, kg/cm2, inches of Mercury, millimeters of Mercury, kilopascal (KPA) or atmospheres. The pressure display is also available in the form of an analog bar graph with user selectable sensitivity if the RPM input is not needed. The MAP-2 is primarily intended as a manifold pressure gauge, however, due to the universal nature of this accurate instrument it can be used for many other applications as well.
      In addition the MAP-2 provides a 24 entry automatic flight log that stores the duration of each of the last 24 flights. It also has a Hobbs meter (can be set to the current engine time) which is password protected, an engine running timer/flight timer and a programmable maintenance timer to schedule routine engine maintenance.
      The MAP-2 also features a programmable low/high alarm for pressure as well as for RPM and it also records the maximum Pressure and RPM reached in permanent memory.
      Typical applications include:
      Engine manifold pressure, Turbo boost pressure, Barometer, fuel or oil pressure gauge (with additional isolation kit), pressure reference, airfoil research and testing
    • Universal pressure and RPM indicator
    • Can Measures RPM from 0 to 20000 RPM
    • Can measure pressures in the range from 0.25 bars (3.6 PSI) to 2.5 bars (36.2 PSI).
    • Pressure can be displayed in millibar, bar, PSI, Kg/cm2, inches of
    • Mercury, millimeters of Mercury, kilopascal (KPA) or atmospheres.
    • Contains a programmable low/high Pressure and RPM alarm
    • Records maximum pressure and RPM reached in permanent memory
    • Includes a 24 entry automatic flight log
    • Includes a settable Hobbs meter (password protected) and an engine running timer/flight timer
    • Contains a programmable maintenance timer for scheduled routine engine maintenance
    • Scalable analog pressure bar graph
    • The MAP-2T model also contains a precision semiconductor sender and a temperature display.
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 176g approx.
    • Download the manual (French): Vel_MAP2.pdf
    • Download the manual (English): Vel_EN_MAP2.pdf
    • Ref : MG_Vel_MAP2
    • Ref : MG_Vel_MAP2T with temperature probe
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity MAP-2T? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Velocity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club!
  • "MAP-2 Simulator": Download installation program MAP2_Simulator.exe Updated 11 july 12
  • "MAP-2T Simulator": Download installation program MAP2T_Simulator.exe Updated 11 july 12

    Return to general description

  • Rotor-1 Dual Rotor / Engine Tachometer

    Velocity SmartSingles ROTOR-1

    Velocity ROTOR-1

    • This product is obsolete and replaced by the BLAZE RPM-2.
    • The Rotor-1 dual rotor / engine tachometer is a 3 1/8” instrument providing two universal RPM inputs that is primarily intended to measure rotor and engine RPM. Typical uses are rotor / engine RPM displays for helicopters and gyroplanes.
    • The Rotor-1 displays rotor and engine RPM in a digital readout as well as in a traditional scalable analog needle display. In addition the Rotor-1 provides a 24 entry automatic flight log that stores the duration of each of the last 24 flights. It also has a Hobbs meter (can be set to the current engine time) which is password protected, an engine running timer/flight timer and a programmable maintenance timer to schedule routine engine maintenance.
    • The Rotor-1 also features a programmable rotor and engine RPM low / high alarm as well as it records the maximum RPM values reached in permanent memory.
    • Dual rotor / engine tachometer
    • Dual digital readouts or a traditional scalable analog needle display
    • Includes a 24 entry automatic flight log
    • Includes a settable Hobbs meter (password protected) and an engine running timer/flight timer
    • Contains a programmable engine and rotor low / high RPM alarm
    • Contains a programmable maintenance timer for scheduled routine engine maintenance
    • Records maximum rotor and engine RPM reached in permanent memory
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 160g approx.
    • Download the manual (French): Vel_ROTOR-1.pdf
    • Download the manual (English): Vel_EN_ROTOR1.pdf
    • Ref : MG_Vel_ROTOR1 (20000RPM)
    • Ref : MG_Vel_ROTOR1-T for Turbine (60000RPM)
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity ROTOR-1? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Velocity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club!
  • "ROTOR-1 Simulator" : Download installation program ROTOR1_Simulator.exe Updated 11 july 12

    Return to general description

  • RTC-1 Aviation UTC Real Time Clock ,OAT and voltage display

    Velocity SmartSingles ROTOR-1

    Velocity RTC-1

    • This product is obsolete and replaced by the BLAZE INFO-2.
    • The RTC-1 is a 3 1/8” aviation Real Time Clock featuring a two time zone system, stopwatch, countdown timer, alarm, OAT (Outside Air Temperature) and Voltage display. It is primarily intended to show UTC time (also known as Greenwich Mean Time, GMT or Zulu time) together with a local time to facilitate ordinary ATC time reporting.
    • Each time zone may be programmed with an additional hour offset to allow for summer time or similar variances. Local offsets may be added or subtracted. Stopwatch and timers can be operated simultaneously to a programmable alarm, making the RTC-1 particularly suitable for sport flying competitions.
    • The RTC-1 can also display OAT in either degrees Celsius or degrees Fahrenheit, as well as can measure voltages up to 30V DC with a programmable low and high voltage alarm.
    • Time is maintained by an internal lithium battery which can be replaced by the user.
    • Features a 2 time zone system, stopwatch, countdown timer, alarm, OAT (outside air temperature) and voltage display
    • Stopwatch and timers can operate simultaneously to a programmable alarm
    • Local time offsets can be added or subtracted e.g. summer time or similar variances
    • OAT can be displayed in degrees Celsius or degrees Fahrenheit
    • Can measure voltages up to 30V (compatible with both 12V and 24V aircraft supplies)
    • Contains a programmable low/high voltage alarm to automatically alternator failures , bad batteries, etc.
    • Records maximum and minimum OAT and maximum Voltage reached in permanent memory
    • Replaceable lithium battery
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 174g approx.
    • Download the manual (French): Vel_RTC-1.pdf
    • Download the manual (English): Vel_EN_RTC1.pdf
    • Ref : MG_Vel_Vel_RTC1
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity RTC-1? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Velocity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club!
  • "RTC-1 Simulator" : Download installation program RTC1_Simulator.exe Updated 11 july 12

    Return to general description

  • RV-3 Universal engine RPM and rotor RPM indicator

    Velocity SmartSingles RV-3

    Velocity RV-3

    • This product is obsolete and replaced by the BLAZE RPM-2.
      The RV-3 universal engine RPM and rotor RPM unit is a 3 1/8” instrument providing a universal RPM counter that can be adapted to a variety of roles. Typical uses are engine RPM displays or helicopter and gyroplane rotor RPM displays.
      The RV-3 displays RPM in a digital readout as well as in a scalable analog bar graph display. In addition the RV-3 provides a 24 entry automatic flight log that stores the duration of each of the last 24 flights. It also has a Hobbs meter (can be set to the current engine time) which is password protected, an engine running timer/flight timer and a programmable maintenance timer to schedule routine engine maintenance.
      The RV-3 also features a programmable RPM low/high alarm as well as it records the maximum RPM reached in permanent memory
    • Measures RPM from 0 to 20000 RPM
    • Includes a 24 entry automatic flight log
    • Includes a settable Hobbs meter (password protected) and an engine running timer/flight timer
    • Contains a programmable low / high RPM alarm
    • Contains a programmable maintenance timer for scheduled routine engine maintenance
    • Records maximum RPM reached in permanent memory
    • Scalable analog bar graph indicating RPM
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 168g approx.
    • Download the manual (French): Vel_RV-3.pdf
    • Download the manual (English): Vel_EN_RV3.pdf
    • Ref : MG_Vel_Vel_RV3
    • Ask for a Catalog/Price list
    Do you want to try an MGL Infinity RV-1? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Infinity" instrument. The simulator allows you to almost fully operate a virtual "Infinity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "RV-3 Simulator"" : Download installation program RV3_Simulator.exe Updated 11 july 12

    Return to general description

  • TC-2 Thermocouple temperature display & monitor

    Velocity SmartSingles TC-2

    Velocity TC-2

    • This product is obsolete and replaced by the BLAZE TC-5.
      The TC-2 thermocouple display unit is a 4 channel 3 1/8” instrument that contains all the features necessary to monitor EGT’s and CHT’s. The instrument is fully programmable by the user resulting in the most flexible solution available. It contains 6 different display screens to allow easy customization.
      The TC-2 can be configured to group EGT’s/CHT’s to common settings or each thermocouple channel can be independently setup for temperature ranges as well as alarms and probe types.
      The TC-2’s high accuracy is due to it’s built in thermocouple linearization curves and cold junction compensation techniques. Temperature probes can be common J, K or E type thermocouple probes as used in CHT or EGT sensors. Temperatures can be displayed in degrees Celsius or degrees Fahrenheit from -100ºC to 1200ºC (-148ºF to 2192ºF). Each channel also offers a programmable high alarm.
      The TC-2 also records maximum temperatures reached for each channel in permanent memory.
    • 6 different display modes
    • Supports J, K and E thermocouple probes
    • Temperatures can be displayed in degrees C or degrees F from -100ºC to 1200ºC (-148ºF to 2192ºF)
    • High accuracy: Built in thermocouple linearization curves and cold junction compensated
    • Records maximum temperatures reached for each channel in permanent memory
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 226g approx.
    • Download the manual (French): Vel_TC-2.pdf
    • Download the manual (English): Vel_EN_TC2.pdf
    • Ref : MG_Vel_Vel_TC2
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity TC-2? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Infinity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "TC-2 Simulator"" : Download installation program TC2_Simulator.exe Updated 11 july 12

    Return to general description

  • TC-3 Thermocouple temperature display & monitor

    Velocity SmartSingles TC-3

    Velocity TC-3

    • This product is obsolete and replaced by the BLAZE TC-6.
      The TC-3 thermocouple display unit is a 12 channel 3 1/8” instrument that contains all the features necessary to monitor EGT’s and CHT’s. The TC3 can be configured to display up to 12 thermocouples in an easy to read bargraph format.
      The TC-3’s high accuracy is due to it’s built in thermocouple linearization curves and cold junction compensation techniques. Common J, K or E type thermocouple probes are supported.
      In addition the TC3 has an individual programmable EGT and CHT alarm with an external output that can switch an external visual alarm indicator such as a lamp. Maximum temperature for each thermocouple is recorded in permanent memory and is also indicated by a solid line above that thermocouples bar graph.
      The TC3 also features a built in engine leaning facility which allows the pilot to optimize the fuel mixture according to peak EGT temperatures as well as a cruise mode facility to provide instant identification of changing EGT/CHT trends.
      Temperatures can be displayed in degrees Celsius or degrees Fahrenheit from -100ºC to 1200ºC (-148ºF to 2192ºF).
    • 12 Channel thermocouple display unit
    • Supports J, K and E thermocouple probes
    • Temperatures can be displayed in degrees Celsius or degrees Fahrenheit from -100 ºC to 1200ºC (-148ºF to 2192ºF)
    • High accuracy: Built in thermocouple linearization curves and cold junction compensated
    • Maximum temperature for each thermocouple is recorded in permanent memory and indicated by a solid line above the thermocouples bar graph
    • Engine leaning function according to peak EGT temperatures
    • Engine cruise mode to instantly identify changing EGT/CHT trends
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 214g approx.
    • Download the manual (French): Vel_TC-3.pdf
    • Download the manual (English): Vel_EN_TC3.pdf
    • Ref : MG_Vel_Vel_TC3
    • Ask for a Catalog/Price list
    Do you want to try an MGL Velocity TC-3? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Infinity" instrument. The simulator allows you to almost fully operate a virtual "Velocity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "TC-3 Simulator"" : Download installation program TC-3_Simulator.exe Updated 11 july 12

    Return to general description

  • TP-2 Dual Channel universal Temperature/Pressure gauge

    Velocity SmartSingles TP-2

    Velocity TP-2

    • This product is obsolete and replaced by the BLAZE TP-4.
      The TP-2 is a 3 1/8” dual channel temperature/pressure gauge with universal inputs that can interface to many sensors such as oil temperature, coolant temperature, oil pressure, fuel pressure, manifold pressure, boost pressure and many more.

      The TP-2 gauge can be setup for a single, dual or combination temperature / pressure display.

      Temperature can be measured using standard automotive resistive senders (e.g. VDO) as well as the MGL Avionics precision LM335 semiconductor sensor. Pressure can be measured using standard automotive resistive senders (e.g. VDO), Rotax 4-20mA senders as well as 0-5V output pressure senders (e.g. UMA). In addition the temperature and pressure inputs can be programmed to a user defined curve for custom senders.

      Both the temperature and pressure readings have a programmable low and high alarm. This results in a contact closure that is typically used to switch a warning lamp on. The TP-2 also records the maximum temperature and pressure values reached in permanent memory.
    • Dual channel universal input temperature and pressure gauge
    • Temperature can be measured using standard automotive resistive senders (e.g. VDO) as well as the MGL Avionics precision LM335 semiconductor sensor
    • Pressure can be measured using standard automotive resistive senders (e.g. VDO), Rotax 4-20mA senders as well as 0-5V output pressure senders (e.g. UMA)
    • Temperature and pressure inputs can be programmed to a user defined curve for custom senders
    • Can be setup for a single, dual or combination temperature / pressure display.
    • Both temperature and pressure readings have a programmable low and high alarm
    • Records maximum temperature and pressure reached in permanent memory
    • Supports Rotax 4-20mA pressure sender as used in 912/914 engines
    • approx. [email protected] (with backlight) [email protected] (no backlight)
    • Weight: 140g approx.
    • Download the manual (French): Vel_TP2.pdf
    • Download the manual (English): Vel_EN_TP2.pdf
    • Ref : MG_Inf_TP2
    • Ask for a Catalog/Price list
    Do you want to try an MGL Infinity TP-1? Its possible right now by downloading the simulation program (requires a PC running Windows NT, 2000, XP or VISTA) which simulates the operation of the "Infinity" instrument. The simulator allows you to almost fully operate a virtual "Infinity" instrument. Perfect for learning how to use it without using a physical instrument, at home or at your club, !
  • "TP-2 Simulator"" : Download installation program TP2_Simulator.exe Updated 11 july 12

    Return to general description

  • 6HRS010 Compass 3.125" (80mm)

    Infinity SmartSingles HRS Compass 80mm

    HRS SP-6


    Return to general description

    7ARS010 Horizon 3.125" (80mm)

    Infinity SmartSingles ARS

    ARS SP-7

    • This product is obsolete and replaced by the BLAZE 7ARS0001.
    • Horizon display with bank indicator, optional slip indicator & G-Force
    • Angular rates up to 250°/s on any axis, G-forces up to 6G.
    • Completely solid-state, this unit does not rely on traditional mechanical gyro systems. This means no limitation during usage, full 360 degrees operability in both pitch and bank. This unit represents the future of aircraft horizon systems at a price that is making everything else obsolete.
    • The 7ARS010 package is made up of 2 units, one SP-7 Attitude module and one Velocity AV-2 "Airtalk Viewer" display.
    • Additional displays can be added by adding additional AV-x indicators eg. Separate Turn & bank indicator, Separate Attitude indicator etc. See Attitude & Compass page
    • Download the manual (Français): Vel_av-2.pdf
    • Download the manual (English): Vel_EN_av-2.pdf
    • Weight: 340g approx.
    • Ref : MG_Inf_7ARS010
    • Ask for a Catalog/Price list

    Return to general description

    76AHRS010 Horizon & Compass 3.125" (80mm)

    Stratomaster 57mm Vega 76AHRS010 AHRS Compass

    AHRS SP-6 SP-7


    Return to general description

    Software

    MGL "Velocity" Firmware


    Return to general description

    Programming Adaptor

    Infinity Airtalk Adapter

    AIRTALK cable, click for details

    • "AIRTALK" programming adaptor
    • Connects a "Velocity" instrument to an "Airtalk" link, for firmware updates
    • The "Airtalk" link to a PC can be done using a Airtalk-Serial cable.
    • Requires DC power 8 to 28V @ 30mA.
    • Ref : MG_Inf_Adapt
    • Ask for a Catalog/Price list

    Return to general description

     
    MGL Avionics, Stratomaster, Commerçant Delta omega, vente distribution, efis mgl vente

    © 2007-2023 DELTA OMEGA sarl. Visiteurs=582414

    MGL Avionics EFIS iEFIS Stratomaster Instruments Avion Planeur ULM Horizon Cartographie GPS Badin Vario Altimètre Anémomètre Surveillance moteur

    Avertissement