|
 |
|
 |
|
|
|
|
MGL Stratomaster RDAC
RDAC = Remote Data Aquisition Computer)
Some MGL Avionics instruments (E2, Extreme, ULTRA, ENIGMA) use a remote data acquisition module for engine data acquisition.
This architecture makes the installation easy, since there is no need to extend sender cablezs all the way to the cockpit.
The RDAC is installed close to the engine, and connects to the display system with a shielded two wires cable.
Click to view a page describing RDAC/EFIS architecture
There are four versions of RDAC:
RDAC V_D 4 CHT/EGT channels, no manifold pressure sender
RDAC X_B 12 CHT/EGT channels, no manifold pressure sender
RDAC X_D 12 CHT/EGT channels, with manifold pressure sender
RDAC X_E 12 CHT/EGT channels, with manifold pressure sender, OEM version with ASCII output. Upon special demand.
Download the installation manual RDAC_V : Install manual RDAC_V (English .PDF)
Download the installation manual RDAC_X : Install manual RDAC_X (English .PDF)
Download the installation manual RDAC_V : Install manual RDAC_V (French .PDF)
Download the installation manual RDAC_X : Install manual RDAC_X (French .PDF)
You wish to integrate a RDAC to your aplication? Download the RDAC_X OEM protocol manual (English): RDACX_OEM_EN.pdf
You wish to integrate a RDAC to your aplication? Download the RDAC_X OEM protocol manual (French): RDACX_OEM.pdf
The RDAC is supplied with a 3 meters cable.
Four or twelve channel thermocouple amplifier, high resolution chopper stabilized system with full cold junction compensation and bow voltage correction to laboratory standards.
The thermocouple inputs can accept K-type or J-type thermocouples.
Oil and Water temperature NTC input compatible with most oil temperature senders and the MGL water temperature sender.
Also accepts MGL precision semiconductor senders for water and oil temperature.
optional LM335 sensor based temperature sender to indicate ice warning. The sender is normally fitted to the outside of a carburetor, in close proximity to the throttle slider or valve or in the intake airflow.
Oil pressure sender input. 50 to 1000 ohms. Accepts most commercial oil pressure senders including those from VDO. Rotax uses a 200 ohm sender
TWO Fuel level sender input with extensive calibration functions provided to allow direct readout of fuel quantity corrected for tank shape and sender tolerances.
Fuel flow sender input. Can be used with most commercial liquid flow senders. Flow measurement without sender on injection systems by measurement of injcetor opening time (i.e. Hirth engines).
Universal rev counter input. Can be used on a wide variety of engines using a variety of interface methods.
Ref: MG_RDACV_D 4 CHT/EGT channels, no manifold pressure sender
Ref: MG_RDACX_B 12 CHT/EGT channels, no manifold pressure sender
Ref: MG_RDACX_D 12 CHT/EGT channels, with manifold pressure sender
Ref: MG_RDACX_E OEM 12 CHT/EGT channels, with manifold pressure sender, ASCII output
Fordern Sie einen Katalog mit Preisliste an bei MGL Avionics 
|
MGL Stratomaster RDAC Logger
SD Card data logger option for RDACx.
Has to be ordered with RDACx.
All data measured by the RDAC are logged to the SD card.
New file at each power up (or Reset)
About 800Kb per hour, about 1250 hours on a 1Gb SD Card.
Available with or without battery backed up Real Time Clock, which allows to store date and time of files and data blocks.
Ref : MG_RDACx_SD - SD Recorder option for RDAC (without battery backed up clock).
Ref : MG_RDACx_SDRTC - SD Recorder option for RDAC (with battery backed up clock).
Fordern Sie einen Katalog mit Preisliste an bei MGL Avionics
|
|
|
|
|
 |
|
 |
|
|